Lexmark MX310dn Supplies
Toner Cartridges, Maintenance Kits and Parts
19 Items
Lexmark 60F000G (601G)
Black Genuine Toner Cartridge For US Government 2,500 pages, Return Program
Lexmark 60F1H0E
Black Genuine Toner Cartridge High Yield, 10,000 pages
Lexmark 60F1H00 (601H)
Black Genuine Toner Cartridge High Yield, 10,000 pages, Return Program
Lexmark 60F0HA0 (600HA)
Black Genuine Toner Cartridge High Yield, 10,000 pages
Lexmark 60F0H0G (601HG)
Black Genuine Toner Cartridge For US Government High Yield, 10,000 pages, Return Program
Lexmark 50F1H00 (501H)
Black Genuine Toner Cartridge High Yield, 5,000 pages, Return Program
Lexmark 60F1000 (601)
Black Genuine Toner Cartridge Standard Yield, 2,500 pages, Return Program
Lexmark 40X9135
Genuine Maintenance Kit 200,000 pages, 110 volt
Lexmark 41X0918
Genuine Pick Roller Tire KIT
Lexmark 40X9136
Genuine Maintenance Kit 200,000 pages, 220 volt
Lexmark 40X9146
Genuine Maintenance Kit 200,000 pages, 100 volt
Lexmark 40X8023
Genuine Fuser 200,000 pages, 110/120 volt
Lexmark 40X8024
Genuine Fuser Standard Yield, 200,000 pages
Lexmark 50F0ZA0 (500ZA)
Black Genuine Imaging Unit Standard Yield, 60,000 pages
Frequently Asked Questions
The MX310dn uses 7 toner cartridges, including LEX 50F1H00, LEX 60F1H00 and LEX 60F0HA0.
LEX 60F1000 (LEX 601) prints 2500 pages, LEX 60F1H00 (LEX 601H) prints 10000 pages. Choose LEX 60F1H00 (LEX 601H) for high-volume printing (lower cost per page); LEX 60F1000 (LEX 601) costs less upfront for occasional use.
The LEX 60F1H00 cartridge has an approximate yield of 10000 pages.
Yes — the MX310dn uses a replaceable imaging drum: LEX 50F0ZA0 (LEX 500ZA), LEX 50F0Z00 (LEX 500Z), LEX 50F0Z0G (LEX 500ZG), LEX 50F0Z0E.
Yes — the replacement fuser for the MX310dn is: LEX 40X8023, LEX 40X8024.
The MX310dn uses these maintenance parts: LEX 40X9135, LEX 40X9146, LEX 40X9136.
A "Supply Problem" message on the MX310dn usually points to a chip-communication hiccup rather than an empty cartridge. Power-cycle the printer (off for 30 seconds, then on), reseat the cartridge until it clicks into place, and gently clean the gold chip contacts with a dry cloth. If the message returns, a replacement LEX 60F1H00 will clear it.