Lexmark X852e Supplies
Toner Cartridges, Maintenance Kits and Parts
28 Items
Lexmark X644X41G
Black Genuine Toner Cartridge High Yield, 32,000 pages
Lexmark X850H21G
Black Genuine Toner Cartridge Standard Yield, 30,000 pages
Lexmark 40X0700
Genuine 2tm/ttm Drive Motor
Lexmark 40X5985
Genuine Fuser
Lexmark 40X2336
Genuine ADF Transport Roll Assembly
Lexmark 40X2335
Genuine ADF Exit Roll Assembly
Lexmark 40X2334
Genuine ADF Feed OUT Roll Assembly
Lexmark 40X2333
Genuine ADF Registration Roll Asmbly
Lexmark 40X2280
Genuine ADF Feed/pick Roll Assembly
Lexmark 40X2233
Genuine Mirror Retaining Clip
Lexmark 40X1387
Genuine Transport Roller KIT
Lexmark 40X0793
Genuine Duplex Media Transport Roll KIT
Lexmark 40X0770
Genuine Feed Unit Roll KIT
Lexmark 40X0625
Genuine Registration Roll Asmbly
Lexmark 40X0605
Genuine Transport Roller KIT
Lexmark 40X0603
Genuine Multipurp Pick Roll KIT
Lexmark 40X0398
Genuine Fuser Maintenance Kit 300,000 pages, 220 volt
Lexmark 40X2375
Genuine Fuser Maintenance Kit 300,000 pages, 110-120 volt
Lexmark 40X2503
Genuine Fuser Assembly 300,000 pages, 110/127 volt
Lexmark 40X2734
Genuine ADF Maintenance Kit
Lexmark 40X0594
Genuine Feed Unit Roll Kit
Lexmark 40X0394
Genuine Fuser Maintenance Kit 300,000 pages, 110/120 volt
Lexmark 40X2378
Genuine Fuser Standard Yield, 300,000 pages
Lexmark 40X2504
Genuine Fuser Standard Yield, 300,000 pages
Lexmark X850H22G
Black Genuine Photoconductor Standard Yield, 70,000 pages
Frequently Asked Questions
The X852e uses LEX X850H21G and LEX X644X41G toner cartridges. LEX X850H21G yields 30000 pages; LEX X644X41G yields 32000 pages.
LEX X850H21G prints 30000 pages, LEX X644X41G prints 32000 pages.
The LEX X644X41G cartridge has an approximate yield of 32000 pages.
Yes — the X852e uses a replaceable imaging drum: LEX X850H22G.
Yes — the replacement fuser for the X852e is: LEX 40X0394, LEX 40X2503, LEX 40X2375, LEX 40X0398, LEX 40X2378, LEX 40X2504, LEX 40X5985.
The X852e uses these maintenance parts: LEX 40X2734.
If your X852e displays a "Supply Problem" alert, it's almost always the cartridge chip not being read correctly — not a faulty cartridge. Switch the printer off for about 30 seconds, take the cartridge out and slot it back in firmly, then wipe the small metal chip contacts with a dry, lint-free cloth. Still showing the alert? Install a fresh LEX X644X41G or reach out to our support team.