Xerox WorkCentre XE60 Supplies
| Print/copy speed: | 8/6 ppm |
| Print resolution: | 600 dpi |
| Copy zoom range: | 50-200% |
| 2-sided copying: | Manual |
| Paper handling: | 250-sheet tray |
| Finishing: | No |
| Maximum original size: | 8.5 x 14 in. |
| Maximum copy size: | 8.5 x 14 in. |
| Dimensions: | 18.2 x 16.8 x 9 in. |
Toner Cartridges, Maintenance Kits and Parts
20 Items
Xerox 6R917
Black Genuine Toner Cartridge Standard Yield, 3,000 pages
Xerox 106R364 (106R00364)
Black Genuine Toner Cartridge Standard Yield, 3,000 pages
Xerox 6R916
Black Genuine Toner Cartridge Standard Yield, 3,000 pages
Xerox 13R553
Black Genuine Toner Cartridge Standard Yield, 18,000 pages
Xerox 13R0554
Genuine Drum Standard Yield, 20.000 pages
Sharp UX-36ND (UX36ND)
Genuine Toner Cartridge Standard Yield, 9,000 pages
Sharp FO-26DR (FO26DR)
Genuine Drum Standard Yield, 20,000 pages
Sharp FO-29ND (FO29ND)
Black Genuine Developer Standard Yield, 3,000 pages
Sharp FO-28DR (FO28DR)
Black Genuine Drum Standard Yield, 20,000 pages
Sharp AL-80DR (AL80DR)
Genuine Drum Unit Standard Yield, 20,000 pages
Sharp UX-36DR (UX36DR)
Black Genuine Drum Standard Yield, 20,000 pages
Remanufactured 6R916
Black Remanufactured Toner Cartridge Standard Yield, 3,000 pages
Frequently Asked Questions
The WorkCentre XE60 uses 13 toner cartridges, including SHR JX-92NT, SHR FO-26ND and SHR UX-36ND.
CTC FO-26ND prints 2000 pages, SHR JX-92NT (SHR JX92NT) prints 20000 pages. Choose SHR JX-92NT (SHR JX92NT) for high-volume printing (lower cost per page); CTC FO-26ND costs less upfront for occasional use.
The SHR JX-92NT cartridge has an approximate yield of 20000 pages.
For SHR FO-26ND you can choose Genuine Sharp (SHR FO-26ND (SHR FO26ND)) or a Remanufactured option (CTC FO-26ND) at a lower price per page, same 2000 page yield. For XER 6R916 you can choose Genuine Xerox (XER 6R916) or a Remanufactured option (CTC 6R916) at a lower price per page, same 3000 page yield.
Yes — the WorkCentre XE60 uses a replaceable imaging drum: SHR AL-80DR (SHR AL80DR), SHR UX-36DR (SHR UX36DR), XER 13R0554.
The "Supply Problem" notice on the WorkCentre XE60 is typically a recognition fault, not a defective cartridge. Start by turning the printer off for 30 seconds. Reseat the cartridge, clean its chip contacts with a dry cloth, then power back on. If nothing changes, the fix is a fresh SHR JX-92NT.